Installation manual

REDUNDANT SYSTEMS

6.2 MECHANICAL INSTALLATION

6.2.1 BHS Mounting Frame + REDS Additional Frame Kit

The REDS mounting frame can be constructed by mounting the REDS Additional Frame Kit

(PN 9K3L00052) to the BHS Standard Mounting Frame kit (PN 9K3L01068).

Figure 30 - BHS Standard Mounting Frame (9K3L01068) + REDS Additional Frame Kit (9K3L00052)

NOTE

With respect to the BHS Standard Mounting Frame, the REDS Additional

Frame Kit provides additional Bosch Frame parts (indicated by R# in the

figure above), to install the second SC6000, PWO and Encoder.

NOTE

Profile #R7 is used for secondary encoder mounting. Alternatively, profile

#R16 can be used to mount the second encoder directly to the conveyor

frame. See par. 6.2.4.

Install the

second PWO

here on Profile

#4.