Installation manual

CONNECTIONS
15
3
3 CONNECTIONS
The SC6000 controller and the PWO in combination with DS8100A and DX8200A readers
provide an easy way to build-up a reading station in terms of connections and setting of all
system parameters.
3.1 HOST COMPUTER CONNECTIONS
The Host computer can be connected to the reading system in two ways:
directly to the SC6000 using the proper connectors available on the bottom panel. All the
SC6000 models provide connectivity through several transports: Main Com Port, Aux
Com Port, Modem Com Port, Ethernet. Specific SC6000 models also provide Dual
Ethernet, Profibus and DeviceNet connectivity.
Figure 15 - Host Computer Connectivity Through the SC6000 Bottom Panel
inside the PWO through the proper spring clamp terminals (in this case, use a CAB-
SC6103 to bring signals from the SC6000 to the PWO).
Figure 16 - Host Computer Connectivity Internally to the PWO
HOST computer