Installation manual

MECHANICAL INSTALLATION

Figure 13 - BHS 2610 L-Label Airport Scanner Array Front View

Note 1: the arrows indicate the DX8200A reference point stops.

Note 2: the drawing refers to a conveyor height of 800 mm. If the height is different, all the

height measures change accordingly. Refer to the table below:

Conveyor Height (mm)

Frame Height (mm)

800

250

850

200

900

150

950

100

1000

In the event the conveyor height exceeds 1000 mm, it will be necessary to replace the

vertical frame sections with appropriate dimensions.

Note 3: for the bottom scanners, the minimum distance from the conveyor belt to the

scanner window is 570 mm.

(drawing above)

Conveyor

Height

Frame Height

note 2

Reference Stops

note 1

Reference

Stops

note 1

Reference

Stops

note 1

Min Bottom

Scanner Distance

note 3