Installation manual

DS2100N REFERENCE MANUAL

d. Hardware interface selection

e. Output data format configuration

The On Line operating Mode requires the reader to be connected to an external

Presence Sensor using EXT TRIG/PS A and EXT TRIG/PS B inputs.

The Automatic operating mode does not require connection to an external Presence

Sensor. When working in this mode the reader is continuously scanning, while the

reading phase is activated each time a barcode enters the reader reading zone. The

reader stops reading after an N number of scans without a code. Barcode characters

are transmitted on the serial interface. In case of a failed reading phase no message is

sent to the host computer.