Installation manual

RAPID CONFIGURATION

STEP 4 – INSTALLING GENIUS™ CONFIGURATION PROGRAM

Genius

™

is a Datalogic scanner configuration tool providing several important advantages:

• Wizard approach for new users;

• Multi-language version;

• Defined configuration directly stored in the reader;

• Communication protocol independent from the physical interface allowing to consider the

reader as a remote object to be configured and monitored.

To install Genius™, turn on the PC that will be used for the configuration, running

Windows 98, 2000/NT or XP, then insert the Genius™ CD-ROM, wait for the CD to

autorun and follow the installation procedure.

This configuration procedure assumes scanner connection to a C-BOX 100/150. Genius™,

running on a laptop computer, is connected to the scanner auxiliary port through the C-BOX

100/150 9-pin connector.

Wizard for Quick Reader Setup

After installing the Genius™ software program the following window appears asking the user

to choose the desired configuration level.

Figure 7 - Genius™ Wizard Opening Window

The Wizard option is advised for rapid configuration or new users, since it shows a step-by-

step scanner configuration.