Installation manual

RAPID CONFIGURATION
1
STEP 2 – MOUNTING AND POSITIONING THE SYSTEM
1. To mount the DS2100N, use the mounting bracket to obtain the most suitable position for
the reader as shown in the figures below.
Pitch
Skew
Tilt
Skew
Figure 2 - Positioning with Mounting Bracket
2. When mounting the DS2100N take into consideration these three ideal label position angles:
Pitch 0°, Skew 10° to 30° and Tilt 0°.
Minimize Assure at least 10°
P
S
Figure 3 – Pitch and Skew Angles
T
Minimize
Figure 4 – Tilt Angle
3. Refer to the Reading Diagrams in chp. 7 to decide the distance your scanner should be
positioned at.
3