Specifications

Matrix-2000™ Reference Manual

4 SOFTWARE CONFIGURATION

Software configuration of your Matrix-2000™ for static reading or simple code reading

applications can be accomplished by the Autolearning Procedure (which requires no external

configuration program or by using the VisiSet™ Autolearning Wizard for easy setup. These

procedures are described in chapter 1.

For all other applications use VisiSet™ through the reader serial ports (or Ethernet port for

Matrix-21XX only).

NOTE

Before using VisiSet™ via Ethernet, it is necessary to configure Matrix-

2000™ Ethernet port parameters using VisiSet™ via Main or Auxiliary serial

port (for further details refer to the VisiSet™ Help on line).

4.1 VISISET™ SYSTEM REQUIREMENTS

To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds the

following:

• Pentium processor

• Win 95/98/2000, NT 4.0 or XP

• 32 MB Ram

• 5 MB free HD space

• one free RS232 serial port with 115 Kbaud

• SVGA board (800x600) or better using more than 256 colors

4.2 INSTALLING VISISET™

To install VisiSet™, proceed as follows:

1. Turn on the Laptop or PC that will be used for configuration (connected to the Matrix-

2000™ communication ports).

2. After Windows finishes booting, insert the CD-ROM provided.

3. Launch VisiSet™ installation by clicking

Install.

4. Follow the instructions in the installation procedure.