Instruction manual

MATRIX 200™ REFERENCE MANUAL
6
The same configuration
can be made to a Host using a TCP/IP Ethernet interface. In this
case the Master is connected to a CBX500 with BM200/210 Host Interface Module installed.
The TCP/IP Ethernet, auxiliary, and ID-NET™ interfaces are connected as shown in the
figure below.
3
Po
wer
CBX500
Slave#1 Slave#n
2
1
Master
 BM200/210 TCP/IP Ethernet Interface
 External Trigger
 ID-NET™ (up to 16 devices - practical limit)
Host
Figure 90 – ID-NET™ M/S Synchronized Layout with BM200/210 TCP/IP Ethernet Interface to Host
74