Instruction manual

RAPID CONFIGURATION
1
6.
From the "Advanced Settings for COMx" dialog:
 Expand the "COM Port Number" menu and select a new COM Port number if
desired (optional).
 Set the "BM Options" -> "Latency Timer" (msec) parameter to 1.
You are now ready to u
se the new COM Port.
Matrix 200™ USB models can be connected in a Point-to-Point layout to a local host through
their USB cable. No external power supply is necessary.
Matrix 200™
Host
Figure 3 – Matrix 200™ USB Model in a Point-to-Point Layout
5