Operation Manual

CFS4000 UV Counterfeit Detection

The Counterfeit Detector is based on UV fluorescent emis-

sion. Real banknotes under ultraviolet rays usually absorb the

UV light and will show special marks made with fluorescent

inks. However, most counterfeit banknotes only reflect the

UV lights, without showing fluorescent marks.

To use the Counterfeit Detector:

1. Quickly press the Base button to light the UV LEDs.

2. Hold the item to be verified under the LED lights as

shown below, to ensure that the special fluorescent

marks are visible.

3. The LEDs are set to switch off automatically after

about two minutes. To keep the UV LEDs in

always-on mode, quickly press the Base button a sec-

ond time within 10 seconds of the first press.

4. To switch the LEDs off manually, simply press the

button again.

Patents

This product may be covered by one or more of the follow-

ing patents.

Design Patents: CN ZL201030175545.9; EP1177943;

USD629003.

Additional patents pending.

An external power supply is necessary for full

functionality of the UV Counterfeit Detector.

Use only the recommended AC adapter 12Vdc.