Installation manual

STS400™ INSTALLATION MANUAL
50
7
7 MAINTENANCE
7.1 STS400™: WHAT YOU CAN AND CANNOT DO
The STS400™ comes pre-assembled, configured, calibrated and tested. Very few changes
may be needed (and are allowed) to adapt the system to the plant operating conditions.
Several changes are not permitted and if they are carried out the warranty is
automatically void.
 If necessary, the readers’ configuration can be altered, but this should be done only
according to the indications in chapter 6.
 The Matrix 410™ ATS readers are self-contained units (unique part #) and must not
be disassembled. In the event of a faulty unit, it must be replaced with another Matrix
410™ ATS.
 The Matrix 410™ ATS lens cover must not be unscrewed or removed. A warranty
seal is present that voids warranty if broken.
 The Matrix 410™ ATS lens must not be tampered with to alter the focus/diaphragm
adjustment.
 The Matrix 410™ ATS internal illuminator must not be unscrewed or removed.
7.2 CLEANING
Clean the reading windows periodically for continued correct operation of the array (see
General Views
, 5).
Dust, dirt, etc. on the window may alter the reading performance.
Repeat the operation frequently in particularly dirty environments.
Use soft material and alcohol to clean the window and avoid any abrasive substances.