Installation manual

DISPLAY MENUS

4 DISPLAY MENUS

NOTE

While working on the display the complete reading station is offline. The

Offline state means that no readings are performed, no data is transmitted

to the PLC and any connection to WebSentinel will be lost. The display

menus allow you to: change the messages on the display (View), perform

backup and restore, and reset the counters.

If the reading station is turned on and the system is ready, the master-reader shows the most

important values on the display.

Matrix 410 ATS-XXX

6.xx SYN M00

SN XXXXXXXXX

ETH XXX.XXX.XXX.XXX

The display can be used with the three buttons below it. The up arrow button allows you to

scroll up through the menu. The down arrow button allows you to scroll down through the

menu. With the middle button, you can confirm your selection.

To access the menus, press the two outermost buttons simultaneously for several

seconds.