Manualshelf

Installation manual

ManualsBrandsDatalogic ManualsPrint & ScanCBX500
31323334353637383940
INSTALLATION
25
2
= =
= =
STS400-xx7 centered over conveyor
It’s clear that the plate support assembly must have a positional offset from the center.
Looking at the frame from the Output Side (tires coming out of the page), in order to align the
center of the FOV with the center of the conveyor, an offset towards the left side has to be
applied:
= =
STS400-xx7 with offset over conveyor
The positional offset from the operating width center changes according to the STS400™
model used:
STS400™ Model
Reading Station Type Direction Offset
mm (in)
STS400-015 High Resolution
55 (2.17)
STS400-017 High Resolution
55 (2.17)
STS400-x05 Standard Resolution
70 (2.76)
STS400-x07 Standard Resolution
70 (2.76)