Instruction manual

Connection box C-BOX 300
Installation
S
ubject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
P
epperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Date od issue 08/15/2003
12
4.3 Mechanical installation
The diagram below gives the overall dimensions of the C-BOX 300 and may be used
for its installation.
Figure 4.2 Mechanical dimensions
C-BOX 300 can be installed to operate in different positions. The two screw holes
inside the housing of the C-BOX 300 are for mechanical fixture (Figure 4.3).
To mount the C-BOX 300:
1. Open the C-BOX 300 by unscrewing the 4 cover screws. If necessary, using the
two mounting holes inside the device as a pattern, mark the panel with an
appropriate object and then drill two holes in the panel.
2. Align the C-BOX 300 and insert two screws and screw them into the panel until
tight (see Figure 4.3).