Instruction manual

Connection box C-BOX 300
Installation
S
ubject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Date od issue 08/15/2003
11
4 Installation
4.1 Package contents
Verify that the C-BOX 300 and all the parts supplied with the equipment are present
and intact when opening the packaging; the list of parts includes:
1. C-BOX 300
2. 2 mounting screws
3. 1 adhesive label
A CD-ROM with the required software and drivers comes separately with each
delivery
4.2 Opening the device
To install the C-BOX 300 or during normal maintenance, it is necessary to open it by
unscrewing the four cover screws:
Figure 4.1 The opened C-BOX 300
It is possible to perform the following operations:
• Proceed with the cable connections.
• Set the Profibus node address selection on the rotary switches.
• Mount the C-BOX 300 to a wall or panel.
The C-BOX 300 must be disconnected from the power supply during
this operation.