Installation manual

INSTALLATION

2.6.2 6000, 8000 Scanners

For the 6k/8k scanner Families, the C-BOX 150 can operate in both point-to-point

single scanner configuration layouts and in a whole cluster of scanners in

Master/Slave layouts.

Master

Slave 2 Slave1

C-BOX 150

BTK-6000

CAB-610X CAB-610X

CAB-60XX

Encoder

CAB-610X

Host

CAB-610X

CAB-63XX

BTK-6000

Slave 5 Slave 4

Slave 3

PWR-240

CAB-63XX

NOTE

In a Master/Slave layout with a great number of Slaves, a Power

Supply Unit can be connected to the scanners and the C-BOX 150

can accept the scanner power by setting the Power Source Jumper

in the right position. See paragraph 2.4.6

By default, C-BOX 150 is able to perform Backup/Restore of the whole cluster

(Master and Slaves). The following conditions must be met:

1. The Master/Slave network must be either Synchronized or Multidata.

2. The A.S.R. mode must be disabled.

In order to perform Backup/Restore of Master only, the C-BOX 150 Cluster

GET/SEND parameter must be configured to "Master only".