Hardware manual

Display Tab Impact Reference Guide
Datalogic Automation Inc. 3-26
Display Areas
NOTES: When you switch to the Display tab from another tab, the task does not run automatically. You can
click the Run Once on Current Image button to insure that the tab displays the most current values.
If a tool has a Train property (e.g. the Origin tool), and you move an ROI, you must use the Train method to
update the display. (Click the Setup tab, click the Summary radio button, then select the Train method on the
Show On Display tab. See “Display panel” on page 3-23.)
The Display tab provides a runtime display for a program’s tool properties. You can select which properties
are shown on the Display tab (see “Display panel” on page 3-23). The following examples show the various
parts of the Display tab for a task containing the following tools: Origin, Image Sampling, Line Gauge, and
Pass Fail. To save images displayed in the Display tab, see “Program Preferences” on page 3-9.
• Tool - Click on the tool icon to switch to the Display panel in the indicated tool’s Setup tab.
• Label - This label is defined on the tool Setup tab - Display panel. The default is Tool Name:Property
Name.
• Value - This is the property’s current value. If this is an input value, it can be modified here if it has
not been marked Read Only (see “Display panel” on page 3-23). If it is an input ROI, you can click on
the ROI on the image display to move or resize it.
• Control - This column varies depending on the type of property being displayed.
Boolean Output - Green for Pass, Red for Fail
ROI - Click Display button to toggle the ROI display on the Image
Method - Click the button to the initiate the action listed. For example, Train trains the tool.
The Tool Property
display area