Hardware manual

Impact Reference Guide Design Tab
3-23 Datalogic Automation Inc.
Only tasks have this panel. Here you can define how the task operates.
• Task Type
Called By Another Task or Control Panel: If this task is called by another task or triggered from a
Control Panel, choose this option.
Triggered By This Event: If this task is triggered by an event or hardware trigger in the Impact device,
choose this option, then select the Trigger Event type from the drop down list. See “VPM Task Con-
figuration” on page 3-34 for details about Trigger Event types.
• Inspection Pass/Fail Status
Link: Click this button to link a Pass/Fail status from a tool in the task. This status determines the
Image Border color and whether the border is displayed. To automatically save passed or failed
images with VPM, you must link a status here (see “Program Preferences” on page 3-9).
• Show Border On Display Tab Image - When the linked Pass/Fail status is equal to the following
chosen status, the image border is displayed in red or green.
• Failed / Passed and Failed - Choose the status that determines whether the Image Border is dis-
played.
• Timings - See the Output table at “VPM Task Configuration” on page 3-34.
Display panel
The Display panel for tools and tasks lets you select the properties that are displayed on the Display tab. This
example shows the Display panel for the Pass Fail tool.
• Clear All - Clears all the property selections.
• Select All - Selects all the properties.
This section is displayed only
on the Pass Fail tool.