Hardware manual

Design Tab Impact Reference Guide
Datalogic Automation Inc. 3-22
NOTE: Some tools have only a General and Display panel. For those tools, you need to click the Properties
tab to configure the tool.
This example shows the Pass/Fail panel in the Setup for the Blob tool.
General panel
For tasks and for tool’s without a Setup, you can modify the name here. For tool’s with a Setup, see each
tool’s description (starting on page 3-38) for more details.
Options panel
These radio buttons select the
various setup screens.
ROIs are created and modified
in the image display area.
Some tools have no image.
Tool parameters and results are
configured and displayed in this
area.
Any parameters displayed in
blue in this area are linked from
another tool, like this Output
List. Go to the Properties tab to
change a linked value.
If a setup parameter is disabled
(grey), it is dependent on one of
the other parameters. In this
case, these values are enabled
only when their Feature check
box is checked.
The cursor’s X-Y position and
pixel greyscale intensity is dis-
played here.
This cursor shape means the
ROI is linked from another tool.