Hardware manual

Design Tab Impact Reference Guide
Datalogic Automation Inc. 3-20
Line and Wide Line ROIs
To create a Line or Wide Line ROI
1. Select the desired tool, then click the desired Line ROI Property (depending on the tool).
2. On the toolbar, click the Create ROI button.
3. From the drop down, select the Line ROI.
4. Click on the image where you want to place the ROI.
5. To resize, move, or rotate the ROI, move the cursor along the ROI (the cursor changes to one of these
types), then click and drag the cursor to the desired place or size.
• Move
• Resize / Rotate
• Widen
NOTE: If an ROI moves outside the image window, click the Zoom to Fit All ROIs button on the Display
Area toolbar (page 3-17).
Circular Arc ROIs
Circular Arc ROIs are used in the Circular Pattern Find, Circle Gauge, and Unwrap tools.
To adjust a Circular Arc ROI
1. To adjust a Circular arc ROI, move the cursor around the ROI
border to the point where the cursor changes to the desired
type, then click and drag the cursor to the desired place and/
or size.
• Move
• Increase / Decrease Angle
• Increase / Decrease Radius
• Rotate
• Widen / Narrow Arc
Cut, Copy, Paste, Delete ROIs
To cut, copy, paste, or delete ROIs
1. Select the desired ROI, then click the appropriate button. Some tools do not allow more than one ROI
to be created or allow the only remaining ROI to be deleted.
Tool and Task Test Buttons
Increase/
Decrease
Angle
Increase/
Decrease
Radius
Move
Widen/
Narrow
Arc
Rotate