Manualshelf

Hardware manual

ManualsBrandsDatalogic ManualsComputer equipmentA20
71727374757677787980
Impact Reference Guide Design Tab
3-17 Datalogic Automation Inc.
Display Area Toolbar
Save Image
• When you click the Save Image button, two buttons are displayed. To save the image only, click the
Save Image button. If you click Save Image with Graphics, the image will be saved with all ROIs that
are on the image and Pseuodocoloring (if enabled). Note that images saved with graphics are saved in
24-bit format color and cannot be used as inspection images. You will be prompted to choose the path
and name for the saved file.
NOTE: In order for the image calibration information to be saved and later used in the file camera, the image
MUST be saved in png format without graphics.
Zoom Image
Note: These buttons magnify or shrink the image size in the image window, but the inspected image size is
not affected.
When you click the Zoom Image button, four buttons are displayed.
• Zoom Image In/Out: When you click this button, it stays depressed until you click it again. To zoom in
(up to 1600:1), left click on the part of the image you want to magnify or roll the mouse wheel button
toward you. To zoom out (down to 12.5:1), right click on the part of the image that you want to see in
the center of the image display or roll the mouse wheel button away from you.
• Zoom Image to 100%: When you click this button, the image is displayed at 100% its size (1:1).
• Zoom Image to Fit View Area: When you click this button, the image size is automatically scaled so
you can see the entire image in the image display.
• Zoom Image to Fit All ROIs: When you click this button, the image size is automatically scaled so
that all ROIs on the image can be seen and you can move them back onto the image if necessary. If an
ROI goes off the screen during editing and running a tool, an "ROI Off Image" watermark is displayed
over the image and the display switches to this mode.
Save Zoom Histogram Line Profile
Image Image
Save Image
Save Image with Graphics
Zoom Image In/Out
Zoom Image to Fit View Area
Zoom Image to Fit All ROIs
Zoom Image to 100%