Hardware manual

Design Tab Impact Reference Guide
Datalogic Automation Inc. 3-14
• Total Time
The time since the hardware trigger at the device started the image acquisition process (in microsec-
onds). This is the "trigger to done" time, which includes exposure, acquire, image transfer to the PC,
etc. This is a “live” value during the task run as it is read during the task run and updated to the current
time. Once the task finishes running, this time is locked to the time at which the task finished. Note
that the Process Time and Total Time will not necessarily be equal, since there is some "overhead"
time included in the Total Time.
• Abort Cause
If the tool aborts before completing its run, for example, if an ROI is off image, this column displays
the reason.
Results Display
If you click the Start/Stop Continuous Trigger button, the Results Display is shown. This shows a summary
of results from a tool or task you select. You cannot modify any tool settings while the Results Display is
shown.
The Results Display for a Line Gauge tool is shown here.
Task Tree