Hardware manual

Impact Reference Guide Select Camera
3-5 Datalogic Automation Inc.
Show ROIs (Summary tab) - See “Summary and Add Device” on page 3-5
Show Summary Table buttons - See “Show Summary Table Buttons” on page 3-12.
Start/Stop Auto-trigger - See “Trigger Tab” on page 2-19.
Start/Stop Continuous Trigger - See “Start/Stop Continuous Trigger” on page 3-11.
Task - See “Create a Task” on page 3-33.
Tip - This icon indicates helpful text or a guide for what to do next.
Tool branch - See “Branch” on page 3-205, “Group” on page 3-210, “Multiple Branch” on page 3-211, or
“Pass Fail” on page 3-211.
Tool Input property - See “Properties Tab” on page 3-24.
Tool Method - See “Display panel” on page 3-23.
Tool Output property - See “Properties Tab” on page 3-24.
Trigger Once - See “Trigger Once” on page 3-11.
Unload - See “Unload” on page 3-8.
View Threshold - See “Threshold Viewer” on page 6-1.
Zoom Character Models - (OCR and Character Contour Match tools) See “Change Image Calibration” on
page 3-218 or “OCR” on page 3-180.
Zoom Character Models to 100% - (OCR and Character Contour Match tools) See “Change Image Calibra-
tion” on page 3-218 or “OCR” on page 3-180.
Zoom Image - See “Display Area Toolbar” on page 3-17.
Zoom Image to 100% - See “Display Area Toolbar” on page 3-17.
Zoom Image to Fit All ROIs - See “Display Area Toolbar” on page 3-17.
Zoom Image to Fit View Area - See “Display Area Toolbar” on page 3-17.
Select Camera
You can connect to multiple devices or cameras with VPM. Click one of the tabs to display the desired
device or camera. Editing a vision programs on one device or camera while another camera is online and
triggering may cause unexpected results. Multiple users can connect to one device, but only one user at a
time can edit programs or change data on the device.
Summary and Add Device
Summary tab
Tip: If the Summary and Add Device tabs are not visible, check the "Hide Camera Tabs" setting in Program
Preferences (see page 3-9).