Hardware manual

Impact Reference Guide Camera
2-33 Datalogic Automation Inc.
4. Click the Calibrate button.
Point Settings
• Entered Points: The X and Y coordinates of each Entered Point. The points are NOT marked on the
image.
• Real World Points: The "real-world" location (in X and Y coordinates) of each Entered Point. Double-
click on a field to edit it. Click the appropriate button to Append, Insert, or Delete a Real World point.
Calibrate Pixel Size Only
Use this option for a quick calibration when you know the distance between two points on the image and you
want to calibrate the camera to those dimensions.
To calibrate pixel size only
1. Select Pixel Size Only from the Calibrate drop-down.
2. A line ROI is placed on the image in the image window. Move and size the line until it stretches
between two points with a known distance between them.
3. Enter the distance between the points into the Real World Length field.
4. Click the Calibrate button.
Pixel Size Settings
Pixel size settings are used when you calibrate from Pixel Size Only.
Calibrate From Entered Points Image
(Points marked for illustration only)
Entered
Point 1
Entered
Point 2
Entered
Point 4
Entered
Point 3
Entered
Point 5
Entered
Point 6
X value
increases
Y value
increases
Image
Window