Hardware manual

Impact Reference Guide PC to Device - Router Connection
6-33 Datalogic Automation Inc.
PC to Device - Router Connection
The router is normally configured to assign TCP/IP settings automatically to all network devices. Configure
the router to exclude a range of IP addresses from the DHCP server that is used by the Impact device(s). The
device must be manually configured with unique IP data that is compatible with the router settings.
IP Address: AAA.BBB.CCC.nnn
Subnet: 255.255.XXX.0
Gateway: AAA.BBB.CCC.nnn
The first 3 fields of the IP address (AAA.BBB.CCC) must match exactly on both the PC and Impact devices.
The last field 'nnn' must be unique and in the range of 1 to 254.
The Subnet must match exactly on the PCs and Impact devices.
The Gateway address is not used for direct connection and should be blank on all devices.
Connection with router
PC 1 settings
IP Address: 192.168.0.mmm
Subnet: 255.255.255.0
Gateway: None
Impact Device default settings
IP Address: 192.168.0.128
Subnet: 255.255.255.0
Gateway: None
Router with integral switch and DHCP
10/100 Ethernet connections
Optional
wireless
connection
PC 2 settings
IP Address: 192.168.0.mmm
Subnet: 255.255.255.0
Gateway: None