Hardware manual

Impact Reference Guide Command Line Parameters
6-17 Datalogic Automation Inc.
the software version number. The Impact Device dialog additionally shows the emulated camera port.
2. To connect to the Emulator with VPM, CPM, or Settings, select the device with the desired the name
from the Device Selection list.
3. Click the Connect to Device button.
To close the Emulator:
1. Be sure that VPM, CPM, or Settings are not connected to the Emulator you are closing.
2. Click Exit on the Emulator dialog. The Impact Device dialog Exit button can be disabled (see page 6-
21)
3. Click OK on the Emulator warning dialog.
Command Line Parameters
This section describes command line options you can use with Impact software. Some of the options are
common to all the programs, and some are unique. Be sure the option you are using is available for the pro-
gram you are using.
You must edit the program command line to add parameters. The command line is in the program’s shortcut.
To add multiple options to a single command line, put a space between each option.
To edit the program command line
1. Find the desired program’s shortcut icon on the desktop. This example uses Settings.
2. Right click on the icon.
3. Select Properties from the menu.
Program Shortcut Icons