Hardware manual

Load Vision Program Impact Reference Guide
Datalogic Automation Inc. 4-112
This control is not displayed on the Control Panel Canvas. To see it, click the Select Design View Options
button and select Control Panel Tree (see “Select Design View Options” on page 4-6).
Load Vision Program
The Load Vision Program control loads a vision program file. This control is not displayed on the Control
Panel Canvas. To see it, click the Select Design View Options button and select Control Panel Tree (see
“Select Design View Options” on page 4-6).
Property Name What it is
Image The image currently loaded into this control.
Image Path Click in the field to enter the image’s file name or browse to choose the
image file. Image files may have these extensions: jpg, png, and bmp.
The image file must be on the same disk drive as the Interface Panel file.
IMPORTANT: File names are case sensitive.
Method Name What it does
Load Image Loads the image into this control’s Image property.
Event Name When it happens
Load Completed When the image has finished loading into this control.
Property Name What it is
Program Name
Filter
Filters the files that are displayed in the file browser based on the vision
program names. You can use the asterisk (*) to replace one or more
characters in the program name.
NOTE: Program names are case sensitive.
Browsing Enabled If True, the file browser is displayed, which allows you to select and load
files from client network folders. If False, only files on the Impact device
root path are displayed.
Device Connec-
tion
This property indicates which device contains the vision program to load.
When you add the control to the control panel, this link is created to an
Impact Connector control automatically. If the control panel contains more
than one Connector control, you are prompted to choose one.
Display Loading
Prompt
If True, a prompt is displayed before the program is loaded.
File Path The path to the file in the File To Load property. To access vision program
files on the Impact device, use the path: IMPACT Root/visionprograms. If
this field is blank, the file browser is displayed.