Hardware manual

Range Impact Reference Guide
Datalogic Automation Inc. 4-66
Range
The Range control is used to display and enter the start and end values of Range1D input type in a VPM
tool. You can also link to and enter a Tolerance data type where the minus, nominal, and plus values are cal-
culated from the Range control’s start and end values. See “Using the Range Control” on page 4-68.
Property Name What it is
Background Color Click in the field to choose the control’s background color. (The Visible
property must be True to see the background.)
Caret Color Sets the border text’s position at the top of the border
Height Click in the field to choose the border text’s color.
Width Click in the field to choose the border text’s font properties.
X The border type: Bevel Lowered, Bevel Raised, Etched Lowered, Etched
Raised, Line, or None.
Y The control’s height.
Disabled Value
Color
The Start and End Value color when the control is disabled.
Enabled If True, the control is enabled.
End Editable If True, the End Value is editable. If False, the background color is set to
the Background Color property value and the field cannot be changed.
End Value The current End Value.
End Value Align-
ment
Where the End Value is aligned in its field.
End Value Back-
ground Color
The background color of the End Value field.
End Value Fore-
ground Color
The text color in the End Value field.
End Value Maxi-
mum
The maximum value allowed in the End Value field.
End Value Mini-
mum
The minimum value allowed in the End Value field.
Label Color The Start and End label text color.
Labels Font The Start and End label text font.
Horizontal Labels
Position
The label position when the control’s Orientation is horizontal.
Vertical Labels
Position
The label position when the control’s Orientation is vertical.
Labels Visible If True, the Start and End labels are visible.
Orientation The control’s orientation, horizontal or vertical.