Hardware manual

Impact Reference Guide Check Box
4-49 Datalogic Automation Inc.
Check Box
The Check Box control allows the Control Panel operator to indicate a selection on the Control Panel. For
instance, a control could be enabled or disabled if the operator checks or clears the check box.
ToolTip Text Text displayed when the cursor is held over the control in Run mode.
Icon Click in the field to place an icon on the button. Icon files may have these
extensions: gif, jpg, png, and bmp. The icon file must be on the same disk
drive as the Control Panel file.
Vertical Text Posi-
tion
The button label’s vertical alignment relative to the icon.
Visible If True, the button is visible.
Method Name What it does
Disable Disables the control; it cannot be used
Click Produces the same effect as clicking the control
Enable Enables the control so it can be used
Hide Makes the control invisible
Show Makes the control visible
Event Name When it happens
Action When the button is clicked
Property Name What it is
Background Color Click in the field to choose the control’s background color. (The Transpar-
ent property must be False to see the background.)
Height The check box’s height.
Width The check box’s width.
X The X coordinate of the control’s left edge.
Y The Y coordinate of the control’s top edge.
Editable If True, the Selected property can be modified in Run Mode
Enabled If True, the button is enabled.
Label Font Click in the field to choose the label font properties.
Label Text Color Click in the field to choose the label text color.
Label Position The label’s position relative to the check box.
Property Name What it is