Hardware manual

General Impact Reference Guide
Datalogic Automation Inc. 2-14
5. Enter the same password again in the Confirm Password field. Asterisks are displayed for the pass-
word.
6. If you want the user’s password to expire after a fixed time period, check the Number of days before
password expires check box and enter the number of days. Administrator level passwords never expire.
7. If you want anyone (including Administrators) to be able to change this password, check the Can
Change Password check box.
8. Click the OK button.
To modify a User
1. Select the User ID you want to modify.
2. Click the Modify User button.
3. Change the desired field. If you change the password, you will have to enter the new password again in
the Confirm Password field.
4. Click the OK button.
To delete a User
1. Select the User ID you want to delete.
2. Click the Delete User button.
3. Click the Yes button to confirm the deletion.
Install Users on Multiple Devices
You can copy the User IDs and passwords from the connected device to another device.
To install Users on multiple devices
1. Click Install, then select the target devices for the User IDs and passwords.
NOTE: Any existing User IDs and passwords on the selected devices are overwritten.
2. Click OK.
Passwords
Passwords are case sensitive, can contain any ASCII character (except CR or LF), and must be at least as
long as the Minimum Character Length defined in the Passwords group. They are displayed as asterisks in
entry fields. The Minimum Character Length and Password Reuse values apply to all passwords.
• Minimum Character Length: Specifies the minimum number of characters all newly defined system
passwords must contain. Existing passwords are not affected.
• Password Reuse
Number of Passwords: If Password Expires is enabled, this is the minimum number of new pass-
words that must be used before an old password can be used again. A zero indicates passwords can be
reused immediately.
Minimum Days: If Password Expires is enabled, this is the minimum number of days that must pass
before a password that has already been used can be used again. A zero indicates passwords can be
reused immediately.
You can also modify a password during logon.
To modify a password during logon
A user cannot change their password unless the "Can Change Password" check box is checked. (See “To add
a User” on page 2-13.)