Hardware manual

Control Panel Tree Impact Reference Guide
Datalogic Automation Inc. 4-8
This is an example of a tool with the properties expanded, showing the Input, Output, and Method proper-
ties.
Control Panel Tree
(Control Panel Tree must be enabled. See “Select Design View Options” on page 4-6.)
This is a graphic representation of the controls on the Control Panel Canvas. Controls do not need to be in
any particular order. You can add controls here or on the Canvas. As a control is added to the tree, it also
appears in the Control Panel Canvas, and vice-versa
NOTE: The following controls are displayed only in the Control Panel Tree, not in the Control Panel Can-
vas: Basic, Execute Command, Connector, Load Image, Load Vision Program, Save Vision Program, TCP-
IP Logger, and Timer. See the individual control descriptions for details.
Panel Tabs and Chooser
Click a tab to display a panel. If the number of panels exceeds the list area, the Panel Chooser is displayed.
Click the left arrow on the Panel Chooser to select the leftmost panel, or click the down arrow to select any
panel. To rearrange the tabbed panel’s order, click the tab and drag it left or right to the desired location.
Move Up/Down in Tab Order
Controls do not need to be in any particular order in the control tree, but you can rearrange them if desired.
Click tab and drag to new location