Hardware manual

Impact Reference Guide Lead Statistics
3-223 Datalogic Automation Inc.
Lead Statistics
In the Specialized Drawer
The Lead Statistics tool provides extensive statistics about the pitch, width, and length of part leads. This
tool is used primarily to test leaded parts.
Train
In the Specialized Drawer
When the Train tool runs, it automatically trains the tool that is linked to the Tool To Retrain property.There
are no inputs, but there is an additional General property called Tool To Retrain.
To select the tool you want to Train
1. Click the link icon for the Tool To Train property.
2. Select the desired tool from the task tree. Only tools that can be Trained are highlighted.
Ideal Points Rela-
tive to Tool Origin
A copy of the Ideal point list that have been moved by a distance equal
to the Grid Offset coordinate. This is the X Offset, Y Offset, and Angle
that the entire grid would be moved to perform the Best Fit alignment of
the Ideal point grid to the Actual point grid. The Ideal Points Relative to
Tool Origin can be used to show the final test locations of the Ideal point
grid after the Best Fit operation is completed.
Grid Offset The actual X Offset, Y Offset, and rotation angle used to offset the entire
Ideal Grid relative to the Actual Points to minimize errors and optimize
the X Offset and Y Offsets to a mean of zero. The Grid Offset is given an
Origin data type, and the values are applied to the Ideal Grid point list.
The results of the Grid Offset operation are available as the Ideal Points
Relative to the Tool Origin Point List output.
Grid Radial Offset The Maximum Euclidian distance for the Ideal point to be offset in order
accomplish the Best Fit of the Ideal Grid Points to the Actual Point grid.
Grid Radial Offset
OK
If True, the Euclidian distance of the Grid Offset listed in the Grid Radial
Offset output is less than the Maximum Grid Radial Offset input.
Output Name What it is