Hardware manual

Pass Fail Impact Reference Guide
Datalogic Automation Inc. 3-212
When you add the Pass Fail tool, it automatically creates a list of the tools above it in the task tree that have
a pass/fail status (the input tools). Click the Setup tab to configure the Pass Fail tool.
• Pass/Fail: This is the pass or fail status of the Pass Fail tool. After all the input tools’ pass/fail statuses
have been evaluated, this LED is green if the Pass Fail tool passed and red if it failed. If the Pass Fail
tool passed, the Pass branch is run. If the tool failed, the Fail branch is run.
• Use: When this box is checked, the pass/fail status of that input tool is used to determine the Pass Fail
tool’s status when it runs. If there is a delete icon in this column, it means the input tool is linked from
a task outside the current task. Click the icon to delete the link.
• Tool Name: The input tool name.
• Type: The input tool type.
• Current: If the input tool’s current pass/fail status is pass, the LED color in this column is green. If
the pass/fail status is fail, the color is red.
• Invert: If this box is checked, the input tool’s Current status is inverted or reversed before it is used to
determine the Pass Fail tool’s status.
• Result: This is the result of the Invert operation on the Current status. If the result is pass, the LED
color is green. If the result is fail, the color is red. This status is used to evaluate the pass or fail status
of the Pass Fail tool, based on the Pass Criteria.
• New Pass/Fail Criteria: If you want the Pass Fail tool to evaluate an additional tool, click the Append
button and select the desired task, then select the tool property.
• Pass Criteria:
All Tools Must Pass - If this option is selected, the Pass Fail tool passes only when all the input tools
pass.
At Least One Tool Must Pass - If this option is selected, the Pass Fail tool passes when any of the
input tools pass.
If there are no inputs, the tool fails.
Input Name What it is
Input Image The image being inspected
Pass Criteria All Tools Must Pass - If this option is selected, the Pass Fail tool passes
only when all the input tools pass.
At Least One Tool Must Pass - If this option is selected, the Pass Fail
tool passes if any input tool passes.
Pass Fail tool
Setup window