Hardware manual

Impact Reference Guide Impact Wait For Message
3-199 Datalogic Automation Inc.
2. Click the Add button.
3. When the Add Output dialog is displayed, enter the name for the Output
4. Click the Type drop down and select the type of the data you want to receive.
5. Click OK.
Defining the Message Receiver
To receive a message, you need to define the Receiver parameters which include the message number. The
corresponding Impact Send Message tool must have the same Message Number.
To define the Receiver
1. Click the Setup tab, then click the Receiver radio button.
• Timeout - The Timeout field contains the maximum time (in milliseconds) that the tool will wait for a
matching message number. The wait time starts when tool execution starts. If the Timeout value is