Hardware manual

Impact Send Message Impact Reference Guide
Datalogic Automation Inc. 3-196
To link a value into an Input
1. Click the desired Input in the Input list.
2. Click the Link button.
3. Select the desired tool and property from the Task tree.
To delete an Input link
1. Click the desired Input in the Input list.
2. Click the "x" on the left side of the Value field (under the Value column).
To delete an Input
1. Click the desired Input in the Input list.
2. Click the "x" on the far left side of the Input entry (under the Name column).
Defining the Message Destination
To send a message, you need to define the Destination camera and the Message Number. The corresponding
Impact Wait For Message tool must have the same Message Number.
To define the Destination Camera
1. Click the Setup tab, then click the Destination radio button.