Hardware manual

General Impact Reference Guide
Datalogic Automation Inc. 2-2
Setup Tab
NOTE: Access to functions on this tab may be limited based on a user’s access level and while the device is
online.
General Panel
Device Name
The device name can contain any combination of letters or numbers up to 25 characters in length. There may
be multiple devices on the network with the same name, although this may cause confusion.
IP Address, IP Gateway, and IP Mask
Note: Usually you will not need to use the IP Gateway address. Just leave it blank.
IMPORTANT: Do NOT include a leading zero in an IP Address group (for example 192.168.108.065)
The IP Mask and Address on the client or M-Series processer and Datalogic Impact device or camera work
together so data can be exchanged. The IP Mask is network dependent, but it is the same for each device or
Device Comment A comment about the device or camera. For example, Inspects Bearing
Diameter. This comment appears in the Device Connection dialog.
Task Timeout See “Enable Timeout” on page 2-6.
Output Name What it is
System Time The current time (the number of seconds elapsed since January 1,
1970). You can use the Basic tool to manipulate and format this value.
For example, see “FORMATDATE” on page 5-14.
CPU Temperature The temperature on the processor board (in degrees Celsius)
Available RAM The amount of RAM (in bytes). This number remains static while the sys-
tem is online.
Model The model number
Serial Number The serial number. M-Series cameras include the camera number.
Software Version The Impact software version (Major version.minor version.sub-minor
version Build number)
Kernel Version The operating system software version (Major version.minor ver-
sion.sub-minor version Build number)
Firmware Version The firmware version
Board ID The identification number
HTTP Port The system port the device or camera is using for HTTP commands
Input Name What it is