Hardware manual

Multiple Point to Point Measurements Impact Reference Guide
Datalogic Automation Inc. 3-134
Point List
When you link a points list, the tool checks the correspondence between the source tool’s Tool Origin and
this tool’s Origin to insure the measurement is made on points with the desired reference. The check is based
on the following order:
Distance Type Euclidean: direct distance between the points
AbsoluteX: the distance between Point One and a line through Point
Two's X coordinate and perpendicular to the X axis
AbsoluteY: the distance between Point One and a line through Point
Two's Y coordinate and perpendicular to the Y axis
Distance Type List Allows you to specify a different distance type for each point pair. It will
override the "Distance Type" value if an integer list is linked here. The
allowed values are 0 =Euclidean, 1=AbsoluteX, 2=AbsoluteY.
Tolerance If the distance between the beginning and ending measurement points
exceeds this value, the tool will fail. The parameters are minus, nominal,
and plus.
Tolerance List Allows you to specify a different tolerance for each point pair. If present,
this list will override the "Tolerance" value. If the length of this list does
not match the number of point list pairs, the tool will fail. The number of
output results is based on the length of this list.
Scale Factor A real value that is multiplied by the measured distances. Can be used in
place of calibrating the camera. Same as the input in the Line Gauge
tools.
Scale Factor List Allows you to specify a different scale factor for each point pair. It will
override the "Scale Factor" value if a list is linked here.
Enable Distance
List Out
If True, the Distance List output is populated.
Enable InTolerance
List Out
If True, the In Tolerance List output is populated.
Enable Distance
Error List Out
If True, the Distance Error List output is populated.
Enable Line Seg-
ment List Out
If True, the Line Segment List output is populated.
Output Name What it is
All In Tolerance If True, all measurements are within tolerance
Distance List A list of distances measured
In Tolerance List A list of measurements indicating whether In Tolerance is true or false
Distance Error List A list of measured distances minus the nominal
Line Segment List A list of the measured line segments
Input Name What it is