Hardware manual

Impact Reference Guide Midpoint
3-133 Datalogic Automation Inc.
Midpoint
In the Measurement Drawer
The Midpoint tool calculates the midpoint between two input points and provides its x-y coordinates as an
output.
Multiple Point to Point Measurements
In the Measurement Drawer
The Multiple Point to Point Measurements tool measures the distance between multiple points in a point list.
The points may be paired sequentially, as they appear in the list, or using a user-defined index.
A Setup is available for this tool, which will simplify basic configuration. Click the Setup tab to use it.
Input Name What it is
Input Image Linked Image
Tool Origin The tool’s origin relative to the entire image space
PointOne The x and y coordinates of the first point
PointTwo The x and y coordinates of the second point
Output Name What it is
Midpoint The x and y coordinates of the point midway between the two input
points
Input Name What it is
Input Image Linked Image
Tool Origin The tool’s origin relative to the entire image space
Point List The distance is calculated between the points in this list, based on the
Pairing Type. See “Point List” on page 3-134.
Pairing Type Pair 0-1 2-3 4-5...: calculates measurements between every other point
and the one after it in the list. For example, if you have six points, three
measurements are created (0-1, 2-3, 4-5).
Pair 0-1 1-2 2-3 ...: calculates measurements between the points
sequentially as they appear in the list. For example, if you have six
points, five measurements are created (0-1, 1-2, 2-3, 3-4, 4-5)
User Pairing Indexes: Pair the points using the Pairing Indexes input
Pairing Indexes The order in which the points in the list should be paired, when Pairing
Index Type is selected. The length of this list determines the number of
output results, regardless of the length of the Point List property.