Hardware manual

Impact Reference Guide Color Pixel Fill
3-43 Datalogic Automation Inc.
Color Pixel Fill
In the Image Filtering Drawer
The Color Pixel Fill tool fills portions of a color image with a specified color value. The Find Shape List
defines the area to be filled. The area is filled with the RGB color value specified in the Fill Value property.
The filled area appears on the output image. It can be used to fill bad regions of an image before using a
Color Blob tool. This is faster than using exclude regions in the Color Blob tool.
Edge Enhancement
In the Image Filtering Drawer
The Edge Enhancement tool produces an output image with its edges enhanced. Four of the inputs control
the direction of the edge enhancement. These images show the output image for three of these settings.
Threshold Range
Used
The Threshold Range used to modify the image. The parameters are
start and end.
Input Name What it is
Input Image Linked Image
Tool Origin The tool’s origin relative to the entire image space
Find Shape List The desired region of the image to fill. If no shape is defined, the entire
image is filled.
Shape List ROI
Type
Each Shape is separate ROI: Each shape is processed as a separate
ROI and the results are combined. This mode is faster than the other
mode if the shapes are far apart, but results are duplicated if the shapes
overlap.
ShapeList is One ROI: The ShapeList is one large rectangular ROI and
the shapes are the enabled pixels within the rectangle. The tool may be
slow if the shapes are far apart. This setting allows shapes to overlap
and form complex shapes without repeating the overlapped pixels and
duplicating results.
NOTE: The resulting image is the same for either setting.
Fill Value The percent of each RGB color value used to fill the area.
Output Name What it is
Output Image Image with the area filled (may be viewed on the Output Image tab).
Output Name What it is