Datasheet

www.datalogic.com
ACCESSORIES
REFLECTORS
M18 ADAPTER “NOSE”
The patented ST-S3Z-M18 accessory allows to adapt the miniature sensor
S100 to a M18 tubular mounting. It can be principally use with through
beam and retroreflective models fixing the sensor in the proper holes as
indicated on the accessory housing. It slightly affects the optic system
narrowing the detection beam without changing the operating distance.
ST-5039
SLIT
S100-SLIT-05 0,5x19 mm SLIT
S100-SLIT-1 1x19 mm SLIT
S100-SLIT-2 2x19 mm SLIT
UNI EN ISO9001
Rev. 00, 04/2014
MODEL DESCRIPTION ORDER No.
R1 Ø 23 mm with Ø 31 mm support S940700023
R2 Ø 48 mm with Ø 63 mm support S940700048
R3 18 x 54 mm with 22 x 82 mm support S940700972
R4 47x 47 mm with 51.5 x 61 mm support 95A151340
R4K 51X61 mm IP69K protection 95A151220
R5 Ø 75 mm with Ø 82 mm support S940700075
R6 36 x 55 mm with 40.5 x 60 mm support 95A151350
RT3870 200 x 300 mm self-adhesive reflective tape S940000600
RT3970
200 x 300 mm self-adhesive reflective tape
for polarized light
S940000604
RT3970
60 x 40 mm self-adhesive reflective tape for
polarized light
S940000900
TYPE MODEL DESCRIPTION Order No.
Mounting bracket
ST-505 lateral mounting 95ACC2800
ST-5039 L-shaped bracket 95ACC2270
Slit
S100-SLIT-05 0,5x19 mm SLIT 95ACC3450
S100-SLIT-1 1x19 mm SLIT 95ACC3460
S100-SLIT-2 2x19 mm SLIT 95ACC3470
M18 adapter ST-S3Z-M18 M18 THREADED ADAPTER NOSE 95ACC7850
ST-505
R1
R4
R2
R5
R3
R6
Miniature Sensors - S100
The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct
installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the products.