Spec Sheet

Instinctive Reader
Hand-Held Readers
ELECTRICAL CHARACTERISTICS
POWER SUPPLY 5VDC +- 5%
CONSUMPTION Maximum 180 mA
Operating 155 mA
Sleep mode 120 uA
USB suspend mode 350 uA
MECHANICAL CHARACTERISTICS
WEIGHT About 160 g. (5.65 oz.) (without cable)
CASE MATERIAL ABS and Polycarbonate, plus co-moulded rubber
CABLE LENGTH 2 m (6.1 ft.); USB 1.8 m (5.91 ft.)
PERFORMANCE
LIGHT SOURCE Visible red LED
SENSOR CCD solid state (2048 pixels)
MAX. SCAN RATE 256 scans/sec
READING FIELD EAN13 M=1 (0,33mm) max distance = 21 cm
MAX. RESOLUTION 0.1 mm ( about 4 mils )
PCS min. 15% (Datalogic Test Chart)
READING INDICATORS LED, Good Read Spot, Beeper
READABLE BAR CODES 2/5 family, Code 39 (plus Code 32, Cip 39),EAN/UPC, EAN128,
Code 128, Code 93, CODABAR, TELEPEN, PLESSEY, Code 49,
Code MSI, Code Delta IBM, Code 11, CODABLOCK, Code 16K,
ISBN/ISSN, ISBT128, RSS variants
PROGRAMMING METHOD
Manual Reading special barcodes
Automatic (with RS232) S/W commands through the serial port
DLSm@rtSet™ Windows configuration program
INTERFACES
Heron D130 RS232, USB, Wedge & Wand
Heron D110 RS232 & IBM46xx
Heron D140 LASER/OUTPUT
ENVIRONMENT
AMBIENT LIGHT CONDITIONS Up to 100,000 lux
WORKING TEMPERATURE 0 °C to +55 °C
STORAGE TEMPERATURE -20 °C to +70 °C
HUMIDITY 90% non condensing
DROP RESISTANCE Withstands 1.8 m drops onto a concrete surface
PROTECTION CLASS IP30
Standard Reading Zone (10° skew angle)
STD Heron™ Hands-Free Stand
Accessories
Specifications Reading Diagram