Specifications
Table Of Contents
- Falcon® 4400 Series
- with Windows Mobile®
- Table of Contents
- How to Use this Manual
- Document Overview
- Registering Your Datalogic Product
- Document Conventions
- Batteries and Power
- Configuration Settings
- Software Programs
- Accessories
- Falcon® Desktop Utility
- SNMP Interface
- Cable & Connector Configurations
- Programming Parameters
- Overview
- Programming Codes Without Parameters
- Bar Code Parameters
- Codabar
- Code 39
- Code 93
- Code 128
- European Article Numbering-13 (EAN-13)
- European Article Numbering-8 (EAN-8)
- Interleaved 2 of 5
- Matrix 2 of 5
- MSI
- Pharmacode 39 (Code 32)
- RSS-14
- RSS Limited
- RSS Expanded
- Standard 2 of 5
- Trioptic
- Universal Product Code-A (UPC- A)
- Universal Product Code-E (UPC- E)
- UPC/EAN Extensions
- Aztec Code
- DataMatrix
- Composite
- Maxicode
- OCR
- PDF 417
- MicroPDF 417
- QR Code
- Imaging Controls
- Other Controls
- OCR Configuration
- Programming Bar Codes
- Overview
- Predefined Defaults
- Codabar
- Code 39
- Code 93
- Code 128
- EAN-13
- EAN-8
- Interleaved 2 of 5
- Matrix 2 of 5
- MSI
- Pharmacode 39 (Code 32)
- RSS-14
- RSS Limited
- RSS Expanded
- Standard 2 of 5
- Trioptic
- UPC-A
- UPC-E
- UPC/EAN Extensions
- 2D Symbologies
- Aztec Code
- DataMatrix
- Composite
- Maxicode
- OCR
- PDF-417
- MicroPDF-417
- QR Code
- Imager Labels
- Other Controls
- SDK Installation
- Glossary
- Index
Application Switcher User Interface
Product Reference Guide B-17
Application Switcher User Interface
The application switcher provides the same functionality as the standard Win-
dows
®
Alt+Tab function. This allows the user to cycle through the various
open applications.
The application switcher is activated
via an assigned
Action key specified in
the
Hot Key tab. (Refer to "Setting Hot
Keys" on page B-9.) When the
assigned
Hot Key is pressed, the dialog
shown to the right will be displayed.
Press the
Hot Key assigned to open the application switcher. Press the assigned
Hot Key to cycle through the running applications when the dialog is open.
Press
Enter to switch to the selected application or <Esc> to close the applica-
tion switcher.
The <Esc> key can be used to close the Application Switcher.