Specifications

Falcon Desktop Utility
Product Reference Guide B-7
Setting a Password
Set a password as follows:
1. Enter a password in the field. This allows the user to specify a pass-
word when this utility is launched. By default there is no password set.
2. Re-enter the password in the second field.
3. Tap
Set Password to enable the password.
4. Tap
OK close Set Password Confirmation.
Changing a Password
Change to a new password by completing the steps below:
1. Enter a new value in the
Enter Password field.
2. Re-enter the new value in the
Re-enter Password field.
3. Tap
Set Password.
Removing a Password
Remove a password by completing the steps below:
1. Enter blanks in both
Password fields.
2. Tap
Set Password.
Password Request Dialog Box
Once the password is set, the next time you open the Falcon Desktop Utility, the
FDU Password dialog box opens.
Be sure to record the Password for future reference.
You must tap Set Password prior to exiting FDU in order to store and activate your
new password. It is not necessary to select Enable Falcon Desktop.
CAUTION
If you tap Restore Defaults all custom settings will be removed and restored to the
factory default settings, except a previously set password.