Specifications
Table Of Contents
- Falcon® 4400 Series
- with Windows Mobile®
- Table of Contents
- How to Use this Manual
- Document Overview
- Registering Your Datalogic Product
- Document Conventions
- Batteries and Power
- Configuration Settings
- Software Programs
- Accessories
- Falcon® Desktop Utility
- SNMP Interface
- Cable & Connector Configurations
- Programming Parameters
- Overview
- Programming Codes Without Parameters
- Bar Code Parameters
- Codabar
- Code 39
- Code 93
- Code 128
- European Article Numbering-13 (EAN-13)
- European Article Numbering-8 (EAN-8)
- Interleaved 2 of 5
- Matrix 2 of 5
- MSI
- Pharmacode 39 (Code 32)
- RSS-14
- RSS Limited
- RSS Expanded
- Standard 2 of 5
- Trioptic
- Universal Product Code-A (UPC- A)
- Universal Product Code-E (UPC- E)
- UPC/EAN Extensions
- Aztec Code
- DataMatrix
- Composite
- Maxicode
- OCR
- PDF 417
- MicroPDF 417
- QR Code
- Imaging Controls
- Other Controls
- OCR Configuration
- Programming Bar Codes
- Overview
- Predefined Defaults
- Codabar
- Code 39
- Code 93
- Code 128
- EAN-13
- EAN-8
- Interleaved 2 of 5
- Matrix 2 of 5
- MSI
- Pharmacode 39 (Code 32)
- RSS-14
- RSS Limited
- RSS Expanded
- Standard 2 of 5
- Trioptic
- UPC-A
- UPC-E
- UPC/EAN Extensions
- 2D Symbologies
- Aztec Code
- DataMatrix
- Composite
- Maxicode
- OCR
- PDF-417
- MicroPDF-417
- QR Code
- Imager Labels
- Other Controls
- SDK Installation
- Glossary
- Index
Configuration Settings
2-22 Falcon
®
4400 Series with Windows
Mobile
®
1. Tap Persist to persist the registry.
2. Tap
Persist registry settings to automatically persist the settings at the
time specified in the dropdown box
3. Tap
Clear to delete all persistent registry files from the FlashDisk.
Power
Tap > Settings > System > Power to adjust power management settings. Use
this control panel to check the charge on the battery or to change the
Power
settings.
Battery Tab
The Battery tab provides power indicators for Main battery and Backup battery as
shown in Figure 2-14. Save your settings by tapping
OK, or press <ENTER> on
the keypad.
Advanced Tab
You can determine the idle duration and suspend mode initiation to save bat-
tery power
using the Advanced tab, as shown in Figure 2-14. Save your settings
by tapping
OK, or press <ENTER> on the keypad.
Automatically persisting the registry at frequent intervals may slow system per-
formance.