Specifications

Programming Parameters
E-38 Falcon
®
4400 Series with Windows Mobile
®
The list box displays templates, with
each list item displayed as a one-line
string.
• Use the Char Type spin box to
select allowable characters.
• Use the Number to set length.
• Select/deselect the Check Digit
checkbox.
• Tap the “Add” button to add a
new list item that conforms to
the three controls above this
button.
• Tap “Delete” to remove the
selected item from the list box.
• Tap “Custom” to add a template that does not match a standard. See
Tabl e E-7 on page E-39.
Printable template characters (0x20 – 0x7E) are represented by themselves,
and template control characters are printed according to template characters
shown in Table E-7 on page E-39.
Building a Single Template
A template allows you to specify the format of an OCR string that can be read.
The imager will only decode OCR strings that match a specified template.
This template can be made up of any combination of characters that are speci-
fied in Tab le E- 7. The “Character” column shows what is entered into Custom
to make a custom template. The one exception is the check digit character
(0x03). See "OCR Check Characters" starting on page E-42 for more infor-
mation about OCR check digit.
Template separator characters are not printed; templates are displayed as sepa-
rate list items.