Integration Guide

Integration Guide 1
Chapter 1
Introduction
About this Manual
This Integration Guide is provided to give instruction, opto-mechanical
details, and design considerations to integrate the DE2011-DL model (des-
ignated as “scan engine” or “OEM scan engine” in this manual) specifically
into
equipment-integrated scanning applications.
Manual Conventions
The following conventions are used in this document:
The symbols listed below are used in this manual to notify the reader of key
issues or
procedures that must be observed when using the reader:
Notes contain information necessary for properly diagnosing,
repairing and operating the reader.
CAUTION
The CAUTION symbol advises you of actions
that could damage
equipment or property.
Outline
Chapter 1, Introduction (this chapter) presents information about manual
conventions and an overview of the engine, its features and operation.
Chapter 2, Installation provides information about unpacking, cable connec-
tion information and setting up the scan engine for optimum scan engine
perfor
mance.
Chapter 3, Electrical Integration offers information about electrical compo-
nents.
Chapter 4, Software Interface describes software commands.
Appendix A, Technical Specifications lists physical and performance
charac-
ter
istics, as well as environmental and regulatory specifications.
Appendix B, I2C Command Specifications offers additional
information about
I
2
C Commands.