Integration Guide

Communication Protocol
Integration Guide 23
Camera System Parameters
The following tables list DE2011-DL system Parameters. Table 6 below
shows the camera system info
rmation, while Table 7 on page 24 shows the
user customizable parameters, which will be used as default value by the
engine
. See commands GET CAMERA PARAM, SET CAMERA PARAM and
RESTORE FACTORY DEFAULT for instructions.
All values must be sent and are received via I
2
C with LSB first.
Table 6. Parameter ID codes and length
The following parameters are READ ONLY
Model Number Camera model number 0x0000 18
Serial Number Camera serial number 0x0001 16
Date of Manufacture Camera manufacture date 0x0002 7
Date of Service Camera service date 0x0003
7
Firmware Version Report
Answers with
“APPL<application_firmware_version>” if
the application is running.
Answers with
“BOOT<bootloader_firmware_version>” if
the bootloader is running
0x000A 12
Bootloader Firmware Version Camera bootloader version 0x000B
8
Application Firmware Version Camera firmware version 0x07D4 8
Camera ID Camera ID number 0x07D5
1
Hardware Version Camera hardware version 0x07D6 1
Device Class Camera device class 0x07D7
18
GUID Generally Unique ID 0x000E 32
Family ID Halogen1 Family ID 0x03F7
8
PCB Number PCB Number 0x0BD6 10
Parameter Description
ID Code
(HEX)
Length
(Bytes)