User's Manual

KYMAN-NET™
42
3
3.8.2 Bluetooth® Manager Device Setup
In order to enable a Bluetooth
®
device for communication with the Kyman-NET™ you
must perform the discovery procedure and enable the device as follows:
1. Place the Bluetooth
®
device within the range of the Kyman-NET™ (10 meters).
2. From the “Connections” folder double tap on the “Bluetooth” applet to open the
Bluetooth
®
Manager Device window:
3. Tap on the “Me” button to enter the related window; then, tap on the “ON” button
to activate the Bluetooth
®
module. The module activation may be also performed
by using the WIRELESS COMMUNICATION applet as described in par. 3.7.4.
By tapping on the “HW Details” and “SW Details” buttons, information about the
mobile computer Bluetooth
®
hardware and software will be displayed, while the