User's Manual

KYMAN-NET™
30
3
Default Settings
The following tables contain the default values for the major barcode setup
parameters, according to the type of scan engine mounted on the mobile computer.
For a complete list of parameters and of their configuration procedures, please refer
to the SDK Help file on the CD.
SCAN PARAMETERS
Laser Models
(XXX-1XX,
XXX-4XX)
Imager Models
(XXX-7XX)
Laser Extra Long
Range Models
(XXX-6XX)
ScanTimeout 5000 Not available 5000
BeepType Dual tone Dual tone Dual tone
BeepDuration 20 20 20
BeepFrequency 2000 2000 2000
GoodReadSound Beep.wav Beep.wav Beep.wav
LedDuration 200 mS 200 mS 200 mS
LedPulses 1 1 1
LedKeypad Disabled Disabled Disabled
ContinuousMode Disabled Disabled Disabled
KeyboardEmulation Disabled Disabled Disabled
SoftTrigger Enabled Enabled Enabled
ScanAlwaysOn Disabled Disabled Disabled
NotPrintableChar Leave Leave Leave
BARCODE SYMBOLOGY
SPECIFIC READER
PARAMETERS
Laser Models
(XXX-1XX,
XXX-4XX)
Imager
Models
(XXX-7XX)
Laser Extra Long
Range Models
(XXX-6XX)
UPC A
Enabled Enabled
UPC E
Enabled Enabled
EAN 8
Enabled Enabled
EAN 13
Enabled
*
Enabled
UPC E1
Disabled
EAN Bookland
Disabled
UPC/EAN/JAN
Enabled
Code 39
Enabled Enabled Enabled
Code 39 Full ASCII
Disabled Disabled Disabled
Code 32
Disabled Disabled
Code 39 Trioptic
Disabled
2/5: Interleaved
Enabled Enabled Enabled
2/5: Industrial
Disabled Disabled
2/5: Matrix
Disabled
Code 128
Enabled Enabled Enabled
EAN 128
Enabled Disabled Enabled
ISBT 128
Disabled
Codabar
Enabled Enabled Disabled
RSS
Disabled