User's Manual

KYMAN™
46
3
the Internet, otherwise set the internet proxy parameters according to your
network settings.
- To access from the terminal the shared folders on a networked pc, open the
explorer and enter the IP address (or name) of the pc in the address bar.
You may be required to enter your network username and password.
To access the terminal from a pc you can use an FTP connection. see par.
3.8.3 for details.
3.7.6 Volume Settings
The Volume Settings applet allows managing the audio features and appears as
follows:
Volume Settings Window
The window is divided into three tabs:
- Output tab: allows setting the volume for each audio profile;
- Input tab: allows setting the microphone recording volume;
- Cradle tab: allows selecting the cradle type and managing the vehicle cradle
headset functioning.
The Status bar always displays the current audio profile, which is activated
automatically (by the device) or manually (by the user). Available profiles are:
- Speaker: it is the typical profile reproducing audio through the mobile computer
speaker;
- Cradle: it is automatically activated as soon as the mobile computer is inserted
into the vehicle cradle. Audio is reproduced by the vehicle cradle loudspeaker.
- Headset: it is automatically activated as soon as a headset is directly connected
to the mobile computer. In case the device is inserted into the vehicle cradle and
the headset is connected to the cradle, this profile must be manually activated